Beaver Care Liquid Wax is a ready to use high concentration liquid carnauba wax polish blend, suitable for ALL vehicles exterior paint surfaces.
Beaver Wax Liquid is easy to apply and after use will leave the paint surface silky smooth to the touch and with a very high gloss finish that will demonstrate exceptional water beading, keeping the vehicle cleaner for longer in all weather and road conditions.
Scientifically engineered with micro polymers, nano particles and advanced hydrophobic waxes, its uniquely advanced formulation aesthetically enhances the paint.
How to use
Try and do this on a warm, dry day and if possible keep the vehicle out of direct sunlight to prevent the metal surfaces heating up too much. Before using Beaver Wax Liquid wash the car in the normal way, we would recommend using Beaver Care Shampoo, dry completely.
Applying to only one panel at a time, use a clean application pad or microfiber cloth, apply a small amount of wax and apply to the surface of the vehicle with a light, circular motion, until the panel is evenly coated. Then with the same pad or cloth, go over the panel with light side to side movement to remove the possibility of swirl marks.
Allow to dry for 2 or 3 minutes, then buff to a high shine with a clean microfiber cloth. always finish off with a side to side movement to avoid swirl marks. Move on to the next panel and repeat. Remove any residue from joint and gaps with the edge of the cloth or similar before they dry completely.
250ml / 500ml: Metal bottle
1 Litre Plastic bottle
Caution - Keep out of reach of children. If skin is sensitive wear PVC gloves. In the event of eye contamination, flush with clean water. If swallowed do not induce vomiting; seek medical advice immediately and show this container or label.