Beaver Wash Shampoo High Foam is best for a pre wash and wash before commencing a full detailing wax and polish routine. It contains a balanced blend of surface active ingredients that gives huge amounts of foam to carefully lift traffic film and dirt without harm to polished paintwork and trim.
Suitable for regular maintenance of all vehicle bodywork – especially highly polished surfaces.
Further subsequent treatments from the Beaver polishing range are recommended and fully compatible.
How to use
Shake well before use. We recommend to dilute at a ratio of 1:500 water = 20ml (two caps) in 10L water. If possible, hose bodywork to rinse away excess road film and any grit. Sponge one side of car with shampoo, working downwards from the roof. Rinse and complete other half. Always use light, parallel sponging movement. Try not to allow shampoo to dry before rinsing. Keep sponge clean and ensure no abrasive grit is present. Avoid washing if panels are very hot, in strong sunlight or in freezing conditions. Rinse well with clean water and dry surface. Finally a light wipe with a synthetic chamois.
Safe for use on bodywork (metal, fibreglass, carbon fibre), wheels, glass, soft tops, rubber, chrome.
250ml / 500ml: Metal bottle
1 Litre: Plastic bottle
Caution - Keep out of reach of children. If skin is sensitive wear PVC gloves. In the event of eye contamination, flush with clean water.